IEI Technology HTB-100-HM170, Руководство пользователя

Страница: 94 / 131

HTB-100-HM170 Medical Box PC
Page 80
5.3 Component Replacement Procedure
WARNING!
Users are not advised to attempt to repair or replace any internal or
external components of the HTB-100-HM170 medical box PC other
than those listed below. If any other components fail or need
replacement, contact the IEI reseller or vendor you purchased the
HTB-100-HM170 from or contact an IEI sales representative directly.
To contact an IEI sales representative, please send an email to
322
sales@ieiworld.com .
5.3.1 SO-DIMM Replacement
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the HTB-100-HM170. Please make sure the purchased SO-DIMM
complies with the memory specifications of the HTB-100-HM170.
To replace a SO-DIMM memory module into a SO-DIMM socket, please follow the steps
below.
Step 1:
Follow the instruction described in
Section 3.3
to remove the top cover.
Step 2:
Remove five retention screws (one inside the chassis, two on the side panel and
two on the rear panel) that attach the internal elevated platform to the chassis.
Then, lift the elevated platform to remove it.