16
5.2 Video Decoding
The HDCapture also includes decoding function that decodes the video
signal for video output to the HDMI-enabled display device. To decode a
captured video clip, follow the steps below.
Step 1:
Launch the HDCapture.
Step 2:
Bring up the Decoding page by clicking one of the Device # buttons.
Click the Decoding tab to access the decoding page.
Step 3:
Click Ref button
to locate a video file in the computer to decode.
Step 4:
Select the video format of the selected video clip. The video format
selected here must be the same with the video format of the file
selected in the previous step.
Step 5:
Close the window to save the settings.
Step 6:
This step is only required for the HDC-302E. Select the transmitter bus
(2 or 3). For example, when the Device0 button is selected to decode
the encoded file, please select 2 from the device2 (transmitter bus)
drop-down menu to display the video on HDMI display device via video
output port. Please refer to the following table:
Device Port
Device4 (Transmitter Bus) Setting
Device0
2
Device1
3
Содержание HDC-3 Series
Страница 14: ...13 HDC 302E HDC 304E ...
