IEI Technology FLEX-BX200AI, Руководство пользователя

Страница: 36 / 131

FLEX-BX200AI
Page 20
3.7 M.2 Card Installation (Optional)
To install an M.2 card, please follow the steps below.
Step 1: Remove the top cover. See Section 3.5 above.
Step 2: Locate the M.2 slot as shown in Figure 3-8.
Figure 3-8: M.2 Slot Locations
Step 3: Remove the on-board retention screw as shown in Figure 3-9.
Figure 3-9: Removing the M.2 Module Retention Screw
Step 4: Line up the notch on the module with the notch on the slot. Slide the M.2 module
into the socket at an angle of about 20º ( Figure 3-10 ).