IEI Technology FLEX-BX200-Q370 Скачать руководство пользователя страница 62

Страница: 62 / 153

FLEX-BX200-Q370

Page 44

3.15 RAID Configuration

The

FLEX-BX200-Q370

can provide data protection for serial ATA (SATA) disks via the

Intel® Rapid Storage Technology. To access the Intel

Rapid Storage Technology, please

follow the steps below.

WARNING!

Irrecoverable data loss occurs if a working drive is removed when

trying to remove a failed drive. It is strongly recommended to mark the

physical connections of all SATA disk drives. Drive locations can be

identified by attaching stickers to the drive bays. If a drive member of a

RAID array should fail, the failed drive can then be correctly identified.

CAUTION!

Do not accidentally disconnect the SATA drive cables. Carefully route

the cables within the chassis to avoid system down time.

Step 1:

Connect SATA drives to the system

. Connect two or more SATA drives to the

system. Make sure the drives have the same capacity, are the same type and

have the same speed.

NOTE:

Make sure the SATA drives are EXACTLY the same when they are

configured in a RAID configuration. If they are not the same size, disk

drive capacity is sacrificed and overall performance affected.

Step 2:

Enable SATA drives in BIOS

. Start the computer and access the BIOS setup

program. Go to

Chipset



PCH-IO Configuration



SATA Configuration



SATA Mode Selection

. Enable RAID support for all SATA devices.

Содержание FLEX-BX200-Q370


























































































































































Результаты поиска

Содержание FLEX-BX200-Q370

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology FLEX-BX200-Q370, Руководство пользователя

Результаты поиска

Содержание FLEX-BX200-Q370

Отзывы:

Бренды по названию

Популярные бренды