IEI Technology FLEX-BX200-Q370 Скачать руководство пользователя страница 34

Страница: 34 / 153

FLEX-BX200-Q370

Page 16

3.1 Anti-static Precautions

WARNING:

Failure to take ESD precautions during the maintenance of the

FLEX-BX200-Q370

may result in permanent damage to the

FLEX-BX200-Q370 and severe injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components,

including the WAFER series motherboard and the power module. (Dry climates are

especially susceptible to ESD.) It is therefore critical that whenever the

FLEX-BX200-Q370 is opened and any electrical component handled, the following

anti-static precautions are strictly adhered to.



Wear an anti-static wristband

: Wearing a simple anti-static wristband can

help to prevent ESD from damaging the board.



Self-grounding

: Before handling the board, touch any grounded conducting

material. During the time the board is handled, frequently touch any

conducting materials that are connected to the ground.



Use an anti-static pad

: When configuring the FLEX-BX200-Q370, place it on

an anti-static pad. This reduces the possibility of ESD damaging the

FLEX-BX200-Q370.

3.2 Installation Precautions

During installation, be aware of the precautions below:



Read the user manual

: The user manual provides a complete description of

the FLEX-BX200-Q370, installation instructions and configuration options.



DANGER! Disconnect Power

: Power to the FLEX-BX200-Q370 must be

disconnected during the installation process. Failing to disconnect the power

may cause severe injury to the body and/or damage to the system.



Qualified Personnel

: The FLEX-BX200-Q370 must be installed and

operated only by trained and qualified personnel. Maintenance, upgrades, or

Содержание FLEX-BX200-Q370


























































































































































Результаты поиска

Содержание FLEX-BX200-Q370

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology FLEX-BX200-Q370, Руководство пользователя

Результаты поиска

Содержание FLEX-BX200-Q370

Отзывы:

Бренды по названию

Популярные бренды