IEI Technology FLEX-BX100-ULT5, Руководство пользователя

Страница: 29 / 121

FLEX-BX100-ULT5
Page 15
may only be carried out by qualified personnel who are familiar with the
associated dangers. Never open the equipment. For safety reasons, the
equipment should be opened only by qualified skilled person.

Air Circulation : Make sure there is sufficient air circulation when installing
the FLEX-BX100-ULT5. The FLEX-BX100-ULT5’s cooling vents must not be
obstructed by any objects. Blocking the vents can cause overheating of the
FLEX-BX100-ULT5. Leave at least 5 cm of clearance around the
FLEX-BX100-ULT5 to prevent overheating.

Grounding : The FLEX-BX100-ULT5 should be properly grounded. The
voltage feeds must not be overloaded. Adjust the cabling and provide external
overcharge protection per the electrical values indicated on the label attached
to the back of the FLEX-BX100-ULT5.
3.3 Installation Procedure
To properly install the FLEX-BX100-ULT5, the following steps must be followed. Detailed
descriptions of these instructions are listed in the sections that follow.
Step 1: Unpacking the FLEX-BX100-ULT5 box PC
Step 2: Install HDD
Step 3: Install PoE card (optional)
Step 4: Install M.2 SSD (optional)
Step 5: Install wireless LAN module and antenna (optional)
Step 6: Convert to panel PC (optional)
Step 7: Mount the FLEX-BX100-ULT5
Step 8: Connect the peripheral devices
Step 9: Power the system up Step 0: