manualshive.com logo in svg

IEI Technology ECK-3699GH, Руководство пользователя, Страница: 68 / 181

Поделиться
Скачать
IEI Technology ECK-3699GH Скачать руководство пользователя страница 68

 

ECK-3699GH Embedded System

the system. Incorrect voltages applied to the system may cause damage to 

the internal electronic components and may also cause injury to the user. 

To power on the embedded system please make sure of the following: 

 

The memory module is installed 

 

The fans are properly connected 

 

The top cover is properly installed 

 

All peripheral devices (VGA monitor, serial communications devices etc.) are 

connected 

 

The power cables are plugged in 

4.4.2 Power-on Procedure 

To power-on the ECK-3699GH please follow the steps below: 

Step 1: 

Push the power button. 

Step 2: 

Once turned on, the green power LED should be turned on. See 

Figure 4-12

.

 

Step 0:

(

 

 

Figure 4-12: Power Button and Power LED 

 

 

Page 68 

 

IEI® Technology, Corp

.

 

Содержание ECK-3699GH






















































































































































































Отзывы:

Нет отзывов