IEI Technology ECK-3699GH Скачать руководство пользователя страница 107

Страница: 107 / 181

ECK-3699GH Embedded System

Use the

Hard Disk Drives

menu to specify the boot sequence of the available HDDs.

When the menu is opened, the HDDs connected to the system are listed as shown below:

1st Drive

[HDD: PM-(part number)]

NOTE:

Only the drives connected to the system are shown. For example, if only

two HDDs are connected only “

1st Drive

” and “

2nd Drive

” are listed.

The boot sequence from the available devices is selected. If the “

1st Drive

” option is

selected a list of available HDDs is shown. Select the first HDD the system boots from. If

the “

1st Drive

” is not used for booting this option may be disabled.

5.5.4 Removable Drives

Use the

Removable Drives

menu (

BIOS Menu 18

) to specify the boot sequence of the

available FDDs. When the menu is opened, the FDDs connected to the system are listed

as shown below:

1st Drive

[1st FLOPPY DRIVE]

2nd Drive [2nd FLOPPY DRIVE]

NOTE:

Only the drives connected to the system are shown. For example, if only

one FDD is connected only “

1st Drive

” is listed.

The boot sequence from the available devices is selected. If the “

1st Drive

” option is

selected a list of available FDDs is shown. Select the first FDD the system boots from. If

the “

1st Drive

” is not used for booting this option may be disabled.

Page 107

Содержание ECK-3699GH






















































































































































































Результаты поиска

Содержание ECK-3699GH

Отзывы:

IEI Technology ECK-3699GH, Руководство пользователя, Страница: 107 / 181

Результаты поиска

Содержание ECK-3699GH

Отзывы: