IEI Technology DRPC-120-BT, Руководство пользователя

Страница: 24 / 121

DRPC-120-BTi Embedded System
Page 12
2.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during installation may result in
permanent damage to the DRPC-120-BTi and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the DRPC-120-BTi. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the DRPC-120-BTi or any other electrical component is
handled, the following anti-static precautions are strictly adhered to.

Wear an anti-static wristband
: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding
: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad
: When configuring the DRPC-120-BTi, place it on an
anti-static pad. This reduces the possibility of ESD damaging the
DRPC-120-BTi.
2.2 Unpacking Precautions
When the DRPC-120-BTi is unpacked, please do the following:
 Follow the anti-static precautions outlined in
Section 2.1
.

Make sure the packing box is facing upwards so the DRPC-120-BTi does not
fall out of the box.
 Make sure all the components shown in
Section 2.3
are present.