IEI Technology DM-F17A/PC-R31 Скачать руководство пользователя страница 42

Страница: 42 / 88

DM-F S e rie s Mo n ito r

P a g e 33

3.4.3

Wa ll Mo u n tin g

CAUTION:

Due to safety concerns, it is highly recommended to use the VESA mounting

kits provided by IEI for wall, stand and arm mounting. If the VESA mounting kit

is purchased separately, please make sure the mounting kit is UL-listed.

Each model of the DM-F series LCD monitor has four holes located on the rear panel for

mounting the monitor to a wall. To mount the DM-F series LCD monitor onto a wall, please

follow the steps below.

S te p 6:

Select a location on the wall for the wall-mounting bracket.

S te p 7:

Carefully mark the locations of the four bracket screw holes on the wall.

S te p 8:

Drill four pilot holes at the marked locations on the wall for the bracket retention

screws.

S te p 9:

Align the wall-mounting bracket screw holes with the pilot holes.

S te p 10:

Secure the mounting-bracket to the wall by inserting the retention screws into

the four pilot holes and tightening them (

Figure 3-26

Figure 3-26: Wall-mounting Bracket

Содержание DM-F17A/PC-R31

























































































Результаты поиска

Содержание DM-F17A/PC-R31

Отзывы:

IEI Technology DM-F17A/PC-R31, Руководство пользователя, Страница: 42 / 88

Результаты поиска

Содержание DM-F17A/PC-R31

Отзывы: