IEI Technology DM-F17A/PC-R31, Руководство пользователя, Страница: 29 / 88

DM-F S e rie s Mo n ito r
P a g e 20
3.2 P re -in s ta lla tio n P re pa ra tio n
3.2.1 To o ls
Before installing the DM-F series LCD monitor, make sure the following tools are on hand:

Philips (crosshead) screwdriver : All the retention screws on the system are
Philips screws.

Soft working mat : When the DM-F series LCD monitor is installed, the
screen is placed on the working surface. It is therefore important to rest the
MPC industrial workstation on a soft at that cannot damage the LCD screen
on the front of the DM-F series LCD monitor.
3.3 Exte rn a l P e rip h e ra l De vic e Co n n e c tio n
The external peripheral interface panel connectors for the DM-F series industrial monitors
are listed below.

1 x DisplayPort 1.1

1 x 9V-36V terminal block

1 x Lockable 9V-36V DC jack

1 x HDMI

1 x RS-232 (reserved for resistive touch ATO)

1 x USB 2.0 for touch screen

1 x VGA
Figure 3-1 and Figure 3-2 shows the EPIC panel connectors for the DM-F series LCD
monitor. The following sections fully describe EPIC panel connectors.