IEI Technology Afolux LX Series, Руководство пользователя

Страница: 70 / 131

AFOLUX LX Series Flat Panel PC
Page 56
4.4 Memory Module Replacement
The flat panel PC is preinstalled with a 256MB/512MB DDR memory module. If the
memory module is fail, follow the instructions below to replace the memory module.
Step 1:
Remove the back cover. See
Section 3.5
above.
Step 2:
Remove the internal aluminum back cover. See
Section 4.3
above.
Step 3:
Locate the DDR memory module on the motherboard of the flat panel PC
(
Figure 4-12
).
Figure 4-12: SO-DIMM Socket Location
Step 4:
Remove the DDR memory module by pulling both the spring retainer clips
outward from the socket.
Step 5:
Grasp the DDR memory module by the edges and carefully pull it out of the
socket.
Step 6:
Install the new DDR memory module by pushing it into the socket at an angle
(
Figure 4-13
).
Step 7:
Gently pull the spring retainer clips of the SO-DIMM socket out and push the
rear of the DDR memory module down (
Figure 4-13
).
Step 8:
Release the spring retainer clips on the SO-DIMM socket. They clip into place
and secure the DDR memory module in the socket.
Step 0: