IEI Technology AFL3-W15C-ADLP, Руководство пользователя

Страница: 37 / 156

AFL3-W15C/W19C/W22C-ADLP
Page 21
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the AFL3-
W15C/W19C/W22C-ADLP may result in permanent damage to the
AFL3-W15C/W19C/W22C-ADLP and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL3-W15C/W19C/W22C-ADLP. Dry climates are especially susceptible to
ESD. It is therefore critical that whenever the AFL3-W15C/W19C/W22C-ADLP is accessed
internally, or any other electrical component is handled, the following anti-static precautions
are strictly adhered to.
 Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
 Self-grounding : Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
 Use an anti-static pad : When configuring the AFL3-W15C/W19C/W22C-
ADLP, place it on an anti-static pad. This reduces the possibility of ESD
damaging the AFL3-W15C/W19C/W22C-ADLP.
 Only handle the edges of the PCB : When handling the PCB, hold the PCB
by the edges.
3.2 Installation Precautions
When installing the flat bezel panel PC, please follow the precautions listed below:
 Power turned off : When installing the flat bezel panel PC, make sure the
power is off. Failing to turn off the power may cause severe injury to the body
and/or damage to the system.
 Certified Engineers : Only certified engineers should install and modify
onboard functionalities.