IEI Technology AFL3-W15C-ADLP Скачать руководство пользователя страница 32

Страница: 32 / 156

AFL3-W15C/W19C/W22C-ADLP

Page 16

2.1

Unpacking

To unpack the flat bezel panel PC, follow the steps below:

WARNING!

The front side LCD screen has a protective plastic cover stuck to the

screen. Only remove the plastic cover after the flat bezel panel PC

has been properly installed. This ensures the screen is protected duri

ng the installation process.

Step 1:

Carefully cut the tape sealing the box. Only cut deep enough to break the tape.

Step 2:

Open the outside box.

Step 3:

Carefully cut the tape sealing the box. Only cut deep enough to break the tape.

Step 4:

Open the inside box.

Step 5:

Lift the panel PC out of the boxes.

Step 6:

Remove the peripheral parts box from the main box.

Step 0:

2.2

Packing List

NOTE:

If any of the components listed in the checklist below are missing, do not

proceed with the installation. Contact the IEI reseller or vendor the AFL3

-W15C/W19C/W22C-ADLP was purchased from or contact an IEI sales re

presentative directly by sending an email to

32 6H378 H

[email protected]

Содержание AFL3-W15C-ADLP





























































































































































Результаты поиска

Содержание AFL3-W15C-ADLP

Отзывы:

IEI Technology AFL3-W15C-ADLP, Руководство пользователя, Страница: 32 / 156

Результаты поиска

Содержание AFL3-W15C-ADLP

Отзывы: