IEI Technology AFL3-W07A-BT-N1, Руководство пользователя

Страница: 44 / 109

AFL3-W07A-BT-N1 Panel PC
Page 32
3.7.6 V-Stand Mounting
To mount the AFL3-W07A-BT-N1 using the V-Stand mounting kit, please follow the steps
below.
Step 1: Carefully mark the locations of the four V-Stand screw holes on the mounting
area. Drill four pilot holes at the marked locations for the V-Stand retention
screws.
Figure 3-20: Drill Pilot Holes for V-Stand
Step 2: Align the screw holes on the V-Stand with the VESA mount screw holes on the
system rear panel.
Step 3: Insert the four VESA mount screws into the four screw holes on the system rear
panel. Adjust the V-Stand to a proper position.
Step 4: Tighten until the screw shank is secured against the rear panel.