IEI Technology AFL-W19A Скачать руководство пользователя

Страница: 108 / 138

AFL-W19A/W19B/17D/W15A-GM45 Panel PC

Page 96

NOTE:

Use the following commands to check if the partitions were created

successfully.

Step 6:

Press any key to exit the recovery tool and automatically reboot the system.

Please continue to the following procedure: Build-up Recovery Partition.

C.2.3 Install Operating System, Drivers and Applications

Install the operating system onto the unlabelled partition. The partition labeled as

"Recovery" is for use by the system recovery tool and should not be used for installing the

operating system or any applications.

NOTE:

The operating system installation program may offer to reformat the

chosen partition. DO NOT format the partition again. The partition has

already been formatted and is ready for installing the new operating

system.

To install the operating system, insert the operating system installation CD into the optical

drive. Restart the computer and follow the installation instructions.

Содержание AFL-W19A











































































































































Результаты поиска

Содержание AFL-W19A

Отзывы:

Похожие инструкции для AFL-W19A

Бренды по названию

Популярные бренды

IEI Technology AFL-W19A, Руководство пользователя

Результаты поиска

Содержание AFL-W19A

Отзывы:

Похожие инструкции для AFL-W19A

Бренды по названию

Популярные бренды