IEI Technology AFL-15C-9652, Руководство пользователя

Страница: 53 / 199

Page 35
Figure 4-8: Hard Drive Installed
Step 10:
Replace the aluminum back cover to the chassis.
Step 11:
Replace the plastic back cover.
Step 0:
4.7 AT/ATX Mode Selection
AT and ATX power modes can both be used on the AFL-9652 series. The selection is
made through an AT/ATX switch on the bottom panel (
Figure 4-9
). To select AT mode or
ATX mode, follow the steps below.
Step 1:
Locate the AT/ATX switch on the bottom panel (
Figure 4-9
).
Figure 4-9: AT/ATX Switch Location
Step 2:
The system is set to ATX mode by default. To change to the AT mode, just adjust
the AT/ATX switch to AT mode.
Step 3:
To switch from AT mode to ATX mode, please
load BIOS default or clear
CMOS first
. Then adjust the switch to ATX mode.
Step 0: