IEI Technology AFL-07A-ATOM-N270/WT-R/1GB, Руководство пользователя

Страница: 64 / 170

AFOLUX AFL-ATOM Series Panel PC
Page 49
4.10.3 Arm Mounting
The AFL-ATOM series is VESA (Video Electronics Standards Association) compliant and
can be mounted on an arm with a 75mm or 100mm interface pad. To mount the
AFL-ATOM series on an arm, please follow the steps below.
Step 1:
The arm is a separately purchased item. Please correctly mount the arm onto
the surface it uses as a base. To do this, refer to the installation documentation
that came with the mounting arm.
NOTE:
When purchasing the arm please ensure that it is VESA compliant and that
the arm has a 75 mm interface pad. If the mounting arm is not VESA
compliant it cannot be used to support the AFL-ATOM series flat panel PC.
The AFL-10A-ATOM and AFL-12A-ATOM also support VESA MIS-D 100.
Step 2:
Once the mounting arm has been firmly attached to the surface, lift the flat panel
PC onto the interface pad of the mounting arm.
Step 3:
Align the retention screw holes on the mounting arm interface with those in the
flat panel PC. The AFL-07A-ATOM/ AFL-08AH-ATOM arm mount retention
screw holes are shown in
Figure 4-20
and the AFL-10A-ATOM /AFL-12A-ATOM
are shown in
Figure 4-21
.