IEI Technology AFL-07A-ATOM-N270/WT-R/1GB, Руководство пользователя

Страница: 50 / 170

AFOLUX AFL-ATOM Series Panel PC
Page 35
4.8.2 ATX Power Mode
With the ATX mode selected, the AFL-ATOM panel PC goes in a standby mode when it is
turned off. The panel PC can be easily turned on via network or a power switch in standby
mode. Remote power control is perfect for advertising applications since the
broadcasting time for each panel PC can be set individually and controlled remotely. Other
possible application includes
Security surveillance
Point-of-Sale (POS)
Advertising terminal
4.9 Jumper Settings
NOTE:
A jumper is a metal bridge used to close an
electrical circuit. It consists of two or three metal
pins and a small metal clip (often protected by a
plastic cover) that slides over the pins to connect
them. To CLOSE/SHORT a jumper means
connecting the pins of the jumper with the plastic
clip and to OPEN a jumper means removing the
plastic clip from a jumper.
The following jumpers can be found on the motherboard installed in the AFL-ATOM.
Before the AFL-ATOM is installed, the jumpers must be set in accordance with the desired
configuration. The jumpers on the AFL-ATOM motherboard are listed in
Table 4-1
.
Description Label Type
Clear CMOS J_COMS1 2-pin header
COM1 Pin 9 setting JP8 10-pin header
COM3 Pin 9 setting JP10 6-pin header