IEI Technology ACT-412A-N270, Руководство пользователя

Страница: 59 / 133

ACT-412A-N270 User Manual
Page 59
3.5.2 Write Block
To write the block data into a Mifare card, please follow the steps below.
Step 4:
Select
Write Block
in the command area (
Figure 3-7
).
Step 5:
Configure the data, including block, key, key data, time out and data
(
Figure 3-7
).
Step 6:
Click the
Execute
button to execute the command through the selected serial
port (
Figure 3-7
). The raw data of this command shows in the Raw Data area in
the format listed in
Table 3-4
and
Table 3-5
.
Step 6:
Figure 3-7: Write Block
Formatted: Bullet