REV: 12-12
DOC: 374B
PAGE
8
INSTALLATION INSTRUCTIONS
IEDA524-H / IEDA520DTB DIGITAL MICROPHONE STATION
Figure 6 -
Alternate Single-Gang Electrical Box Method B
Line Level Audio Output Connection
If used, connect a balanced audio cable to the line level audio output connector using the supplied connector as shown
in Figure 7. Ensure that DIP switch 8 is set to the ON position. Connect the other end of the cable to an appropriate audio
device. This line level output will become active if the microphone station loses communications with the announcement
controller.
+
–
S
Set to
ON
Figure 7 -
Line Level Audio Output
Not Included
