Trade name:Wireless Multi-Room StereoAmplifier
model number:AMP-i50Bv2
FCCID:2AMKM-i50Bv2
This device complies with Part 15 of the FCCRules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Made In China
The information contained in thismanual isbelieved to be accurate and reliable. IEASTassumesno responsibility for any
errorscontained in thismanual.IEASTreservestheright to makechangesin thespecificationsand/or
design of theabove
mentioned product without prior notice. The diagramscontained in thismanual may also not fully representthe product
that you are using and theyare for illustration purposesonly.IEASTassumesno responsibilityfor anydifferencesbetween
theproduct mentioned in thismanual and theproduct you mayhave.
Note:
This equipment has been tested and found to comply with the limits for a ClassB digital
device, pursuant to Part 15 of the FCCRules.Theselimitsare designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the userisencouraged to try to correctthe interferenceby one or
more of the following measures:
-- Reorient or relocate the receivingantenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TVtechnician for help.
The information contained in this manual is believed to be accurate and reliable. IEAST
assumes no responsibility for any errors contained in this manual. IEASTreservesthe right to
make changes in the specificationsand/or design of the above mentioned product without
prior notice. The diagramscontained in thismanual may also not fully representthe product
that you are using and theyare for illustration purposesonly. IEASTassumesno responsibility
for any differencesbetween the product mentioned in thismanual and the product you may
have.
Page 13
