background image

Innovative DisplayWorks

G-10f/GCG-10f

2

FOR YOUR FUTURE REFERENCE

•  This easy-to-use manual will guide you in getting the best use of your cooler.

•  Remember to record the model number and the serial number. This information can be found on the 

inside of your cooler.

•  Keep your receipt with this manual for future warranty service.

Model #:  

Serial #:  

Date of Purchase:  

TABLE OF CONTENTS

Parts & Identification ..........................................................3
Safety Precautions ..............................................................4
Features ..............................................................................5
Instructions .........................................................................5
Flammable R290 Warnings .................................................5
Ambient Environment ..........................................................5
Preparation Before Operation ..............................................6
Replacing the Interior Light .................................................7
Replacing the Door LED Lights .............................................8
Setting Up Power Cord Holder ..............................................8
Startup, Operation & Temperature Adjustment .....................9
Lit Door ‘Logo’ Switch ..........................................................9
Repair & Maintenance for Refrigeration Drawer ...................9
Condenser Maintenance .................................................... 10
Maintenance ..................................................................... 10
Cleaning Shutdown Questions & Answers ........................... 10
Reversible Door Exchange ................................................. 11
Replacing the Fuse ............................................................ 13
Troubleshooting ................................................................ 14
After-Sales Service ............................................................. 14 
G-10f Circuit Diagram ........................................................ 15
G-10f Electrical Wiring Diagram ......................................... 16
GCG-10f Circuit Diagram .................................................... 17
GCG-10f Electrical Wiring Diagram ..................................... 18 

Содержание G-10-F33EB





















Отзывы: