30
3
1
3
2
4
Recommended cleaning cycle: every 5 routine cleaning cycles. Servicing accessory: cleaning pen
Unplug the printer from its power supply before cleaning the print head. Follow the cleaning
cycles scrupulously. Avoid any contact between the print head and any metal or sharp objects.
Avoid touching the print head directly with your fingers, as this could affect print quality or
permanently damage the print head.
Wait for 2 minutes after cleaning before using your printer.
3-3b Servicing the Print Head
The cleaning pen can be used up to 8 times for cleaning the print head.
Follow the procedure below:
1. Remove the cover from the cleaning pen.
2. Unplug the power supply cable, open the cover then find the print head.
3. Gently rub the pen from left to right along the print head for a few seconds.
4. Close the cover. Reconnect the printer.
