IDVIEW IV-1600TX-SN Скачать руководство пользователя

Страница: 6 / 85

1. PRODUCT FEATURES

1.1 Product Introduction

This 16CH DVR is a triplex digital recorder with a 16ch multiplexer, capable of simultaneous recording,

playback and live multi-screen viewing. It uses two hard disks and a CD-RW drive instead of VCR tapes

to store video (

FOR CD-ROM MODEL ONLY

). It enables you to enjoy the extreme flexibility of digital

image archiving instead of clumsy tape management. Equipped with a range of comprehensive features,

such as playback picture-by-picture, quick access video recording by time and event, system software

which can be upgraded, the expandable capacities of hard drive, and much more, the 16CH DVR will

make your applications far more flexible and effective than ever before. For all purposes the 16CH DVR

is going to prove the timely substitute for time-lapse VCR.

1.2

Product

Features

＊

Non-PC base DSP hardware with proprietary system firmware.

＊

Main recording media: two fixed HDDs plus a CD/RW.

(FOR CD-ROM MODEL ONLY.)

＊

Main recording media: two fixed HDDs & one removable HDD.

(FOR REMOVABLE HDD MODEL

ONLY.)

＊

Maximum 3 hard-disk drive capability (one removable).

(FOR REMOVABLE HDD MODEL ONLY.)

＊

Full triplex operation with simultaneous Live, Play, Record and remote Network operations.

＊

Pre-alarm image recording; 10 seconds prior to an event.

＊

Every camera can be assigned to any channel location under a multi-screen display mode in both

live viewing and playback mode (16-way, 13-way, 10-way, 9-way, 8-way, 6-way, 4-way, 3-way,

2-way).

＊

Refresh rate up to 60 field/sec for 720X240 (NTSC) or 50 field/sec for 720X288 (PAL).

＊

Compression: Motion JPEG.

＊

Quick setup menu.

＊

Live viewing modes: freeze, 2X electronic zoom, custom sequencing.

＊

Recording and live status display of all the hard disks, CD-RW and SD memory card.

＊

Four alternative recording image qualities per channel (best / high / standard / basic).

＊

Individual channel setups for alarm recording rates: normal, double, interleave, and exclusive.

＊

Multiple recording modes: Manual/ Alarm/ Schedule recording.

＊

Multiple search modes: Event list/ Time/ Alarm list/ Filter/ Thumbnail/ SD card/ CD.

＊

Search condition options: time/date, sensor alarm, video loss alarm, motion alarm, and channel

specification.

＊

Thumbnail search display intervals: 8 different intervals (year/ month/ day/ hour/ 10 minutes/ 1

minute/ 10 seconds/ 1 second).

＊

Fast and slow playback of recorded video at various speeds.

Fast forward and reverse (2x, 4x, 8x, 16x, 30x, 100x).

Slow forward and reverse (1/2x, 1/4x, 1/8x, 1/16x, 1/30x, 1/100x).

＊

Adjustable individual camera images (noise filter ON/OFF, brightness, contrast, color, and hue for

Содержание IV-1600TX-SN






















































































Результаты поиска

Содержание IV-1600TX-SN

Отзывы:

Похожие инструкции для IV-1600TX-SN

Бренды по названию

Популярные бренды

IDVIEW IV-1600TX-SN, Руководство по установке и эксплуатации

Результаты поиска

Содержание IV-1600TX-SN

Отзывы:

Похожие инструкции для IV-1600TX-SN

Бренды по названию

Популярные бренды