First-time use - Full Auto Install Mode
When the first time connect IP cameras to the NVR, the NVR will pop up install wizard window. NVR
provides
Plug and Play
feature if user installs NVR in “Full Auto Install” mode. Click “Full Auto Install”
and then the NVR will automatically configure IP address of a camera connected by LAN. The NVR
will then detect the IP camera and display image on screen.
The connection of the LAN port is for IP cameras. The connection of the WAN port is for the NVR to
Internet. This mode is suitable when the LAN is connected to a hub.
Please click “Full Auto Install” and the NVR will automatically configure IP cameras connected by
LAN. After few seconds, the NVR will detect the IP cameras and display images.
＊
The connected IP cameras must be specific IP camera models.
＊
The IP camera is powered on before the NVR is power on.
Note: User also can go to Configuration
→
System
→
Device
→
Install Wizard, to bring up the Install
Wizard.
If the NVR does not configure the IP camera automatically, please recheck the conditions as listed
above and rerun the Install Wizard when it’s ready.
3
