2
Connections:
Primary connection:
1. Connect the IP cameras to the LAN port through the hub. Power up the IP camera before
powering the NVR.
2. Connect at least one proper monitor to the HDMI or VGA output. (Supporting display mode from
1024x768 up to 1920x1080)
3. Connect an USB mouse to a USB port.
Optional connections:
1. Connect the second monitor to the other monitor output.
(Supporting display mode from
1024x768 up to 1920x1080)
2. Connect the audio signal to the AUDIO IN RCA input.
3. Connect the AUDIO OUT RCA output to the monitor or an audio speaker.
4. Connect up to 8 ALARM IN inputs through the supplied terminal blocks.
5. Connect the ALARM OUT output through the supplied terminal blocks.
6. Connect a pan/tilt/zoom control unit to the RS-485 port through the supplied terminal block.
7. Connect to your network through the Ethernet port.
Powering up:
1. Connect the power unit to the AC power outlet.
2. Connect the DC power cord to the 12VDC connector on the unit.
