iDTRONIC BLUEBOX Panel Reader HF NFC, Руководство пользователя

Страница: 6 / 36

BLUEBOX Panel Reader Page 6 of 36
1 Introduction
The PANEL READER RFID HF NFC (Ø22) hereinafter named BLUEBOX is a
read/write 13.56 MHz RFID device that communicates with a ‘host’ system
(typically a PC) through an USB interface. The BLUEBOX acts as a joint through
a set of commands between the host system and a RFID tag (or transponder)
present near the antenna. A software driver must be installed at the ‘host’ (PC)
level to allow the USB connection of the BLUEBOX to appear as a serial port
(COM). It is also possible to configure the BLUEBOX to send a message as an
HID Keyboard with Italian layout (keyboard emulation).
Hereinafter the list of the supported O.S.
• Windows XP SP3 32/64 bit
• Windows Vista 32/64 bit
• Windows 7 32/64 bit
• Windows 8/8.1 32/64 bit
• Windows 10 32/64 bit
From a mechanical point of view, the BLUEBOX , easy to assemble, consists of
four main components as shown:
• the antenna placed in the front element of the device with a diameter of
Ø28 visible on the panel,
• the M22 ring nut for fixing the device on rear of the panel,
• the fixing support of the device, which is placed between the back of the
panel and the fixing ring of the device itself,
• the device that connects to the antenna with strip coupling and is fixed to
the support by means of 2 M3x6 screws.