B5U033000E
Page 21 of 54
Parameter
Description
Range
Default
Standard Single/Multi Tag with Custom Info). In
case of Reserved or User bank selected 0 means
no tag’s memory block access, in case of TID bank
selected 0 means auto-length (class identifier,
manufacturer identifier, serial number).
Note that this parameter become effective
only after a reboot of the reader.
ReadAfterDete
ct Info Flags
The tag’s info (PC, EPC, CRC) to include in the
tag’s ID in ReadAfterDetect mode (Inventory
Mode = Standard Single/Multi Tag with Custom
Info).
Note that this parameter become effective
only after a reboot of the reader.
PC, EPC, CRC
PC, EPC, CRC
Use AFI
To enable/disable the AFI (Application Family
Identifier) management.
Disabled
Enabled
Disabled
AFI
The AFI (Application Family Identifier) value.
0 … 255
0
Sub-Index
Parameter
Description
01h
Inventory
Mode
A byte whose bits are dedicated to manage the inventory mode, the
search mode and the ReadAfterDetect info activation parameters:
•
Bit 7: Not used.
•
Bit 6: Search mode (how the reader singulates tags in
‘continuous’ mode):
o
0b: Dual Target (the reader singulates tags in both
A and B states).
o
1b: Single Target (the reader singulates only tags
that are in A state).
•
Bit 5: Activation of the ReadAfterDetect with custom info as
defined in ReadAfterDetect Password, Bank, Address, Length
and EPC Info parameters (0b=OFF, 1b=ON).
•
Bit 4: Activation of the ReadAfterDetect with auto TID info
(0b=OFF, 1b=ON).
•
Bit 3 … bit 0:
Inventory mode (how the reader does an
inventory in ‘continuous’ mode):
o
0x0: Fast Multi Tag: Inventory mode that does not
take the tag to the Opened but to the Acknowledged
state. This inventory mode is not as secure as the
standard mode, but it is faster.
o
0x1: Fast Single Tag: The same inventory mode like
the Fast Multi Tag, but with the slot count of 1. This
has the effect that no anticollision procedure is
performed.
o
0x2: Standard Multi Tag: Inventory mode like
defined in the EPC C1G2 standard.
o
0x4: Standard Single Tag: The same inventory mode
like the Standard Multi Tag, but with the slot count
of 1. This has the effect that no anticollision
procedure is performed.
