BlueBox RFID Devices
Initial Operation
1.3
Installation of Test/Demo Software “BLUEBOX SHOW”
Unzip the file package “BLEUBOX-SDK-x.yy.z.rar” and start setup. This will not only install the SDK, but also the test/demo
software “BLUEBOX SHOW” to operate all features of the device.
1.4
Establish Connection to a BLUEBOX
Figure 1-2
BLUEBOX Show screenshot. RS232 connection configuration.
Click on the toolbar connect button (Figure 1-3) to connect with the reader. After opening the connection the
software
reads the firmware release of the reader.
Figure 1-3
BLUEBOX Show connect button in the toolbar.
OEM RFID Modules
Page 5 of 12
