IDTECK Star RFK505, Руководство пользователя

Страница: 38 / 51

Setting Changes p.34
ress, the baud rate you set here should match the value you set on the software.
Baud Rates of 4800bps, 9600bps, 19200bps, 38400bps, 57600bps and 115200bps are sup
ported, and 9600bps is default.
To change the Baud Rate, press <ENT>, select the desired baud rate by pressing <4> or <6>,
and then press <ENT> again to confirm.
If a TCP/IP module is being used, the Baud Rate setting must be set the same as th
e TCP/IP module setting.
If communication has problem;
1. Check the status of COMM Address Registration (It has to be same as Applicatio
n Software.)
2. Check the matching Communication Speed (Baud rate) (It has to be same as Ap
plication Software.)
3. Check the matching port between PC communication port and Application Soft
ware port.
4. Check the setting for communication environment of Application Software.
Parity Bit: NONE
Data Bit: 8bit
Stop Bit: 1bit
1.4 Reader 1 (Internal Reader) Mode
This is reader # 1 status.
You cannot change this mode
1.5 Reader 2 (External Reader) Mode