IDTECK Star RFK101, Руководство пользователя

Страница: 6 / 19

6
6. Installation
6-1. Use the provided Template on Page 18 to drill two 6-32 or M3 screw holes 3.3"(8.38cm)
apart in vertical and one 1/2" hole at the center of these two holes.
(If you have installed electric gang box then skip this step.)
6-2. Make sure that magnet is attached by magnet guide of wall mount.
6-3. Using two 6-32 or M3 screws, install wall mount to the wall.
6-4. Insert 5 O-rings to the wall mount as indicated, then route the cable of the main unit through
the center hole and push the main unit to wall mount to lock the main unit and make sure that
the main unit is locked with wall mount.