IDTECK Star 100W, Руководство пользователя

Страница: 13 / 32

13
Summary Table of Commands
Command Action/Change setting values
11 Add User Access Cards (RF CARD ONLY MODE)
12 Add User Access Cards and PIN (RF CARD + PIN MODE)
13 Add User Access PIN numbers (PIN ONLY MODE)
14 Delete User Access Cards (or PIN)
15 Add User Access Card/PIN (RF/PIN Combination Mode)
21 Change Door open time when User Access Card (or PIN) is granted
22 Change Alarm time when User Access Card (or PIN) is denied
23 Change Alarm time when Try-Out error detected
24 Change Alarm time when Door-Contact error detected
25 Change Alarm time when Aux Input #1 detected
26 Change Alarm time when Aux Input #2 detected
27 Change Alarm time when Aux Input #3 detected
28 Change Alarm time when magnet detected
29 Register 2 digits Duress Alarm password
30 Change Alarm time when Duress Alarm detected
31 Test Door open time set by command "21"
32 Test Alarm time set by command "22"
33 Test Alarm time set by command "23"
34 Test Alarm time set by command "24"
35 Test Alarm time set by command "25"
36 Test Alarm time set by command "26"
37 Test Alarm time set by command "27"
39 Change Chime Bell activating time
41 Open door unconditionally
42 Close door unconditionally
43 Enable QUICK ACCESS MODE
44 Disable QUICK ACCESS MODE
45 Enable Toggle Mode for Lock control
46 Disable Toggle Mode for Lock control
47 Enable Unlock followed by Door Contact
48 Disable Unlock followed by Door Contact
51 Disable Melody sound (turning off both the melody & keypress audio feedback)
52 Enable Melody sound
60 Change keypad lock-out time when Try-Out error detected
61 Set Aux Input #1 Detection from ‘L’ to ‘H’
62 Set Aux Input #1 Detection from ‘H’ to ‘L’
63 Set Aux Input #2 Detection from ‘L’ to ‘H’
64 Set Aux Input #2 Detection from ‘H’ to ‘L’
65 Set Aux Input #3 Detection from ‘L’ to ‘H’
66 Set Aux Input #3 Detection from ‘H’ to ‘L’
67 Set Exit Button Input Detection from ‘L’ to ‘H’
68 Set Exit Button Input Detection from ‘H’ to ‘L’
69 Set Door-Contact sensor Input Detection from ‘L’ to ‘H’
70 Set Door-Contact sensor Input Detection from ‘H’ to ‘L’
71 Activate TTL output to ‘H’
72 Activate TTL output to ‘L’
73 Enable Keypad Input To Enter ID Number
74 Disable Keypad Input To Enter ID Number