IDTECK SR10S, Руководство пользователя

Страница: 10 / 16

10
to the COM port. Set I/O of the controller; then you can change the color of the LED. While the LED
control is working, the green LED stays on.
This function is used for changing the LED color representing standby from red to green and applied
to make various modifications according to the different I/O setting of the controller.
For more information about the I/O setting of the controller, refer to the controller’s user manual.
10-4. Buzzer Control
You can control the buzzer of the device at your preference.
Connect the Buzzer Control Input wire (Blue wire) to the NO port of controller relay output, and GND
to the COM port. Set I/O of the controller; then you can generate beep sound. While the buzzer
control is working, the product keeps sounding beep.
The controller can use the I/O setting to set the buzzer controller so that it sounds the additional beep
for authorized/unauthorized access. For more information about the I/O setting of the controller, refer
to the controller’s user manual.
※
Caution: If you keep generating beep sound, the reader can’t read the card.
10-5. Issuance Information Setting
In the initial state after power-on, the SR10S is set to read the serial number of a card that is
presented to the unit. Refer to the PRG2000S manual or the PRG2000S Programmer manual to find
out how to configure the SR10S to be able to cards issued using the PRG2000S.