FFQG112S December. 2016 Copyright IDTECK Co., Ltd.
Quick Installation Guide
5-8
Power up NEO RF245.
5-9
Green and red LED will light up as shown below. The device will generate 10 beeping sounds for 10
seconds.
5-10
During those 10 seconds, scan a tag from a desired location. The tag should be scanned 10
straight times. For the first 5 times of the scanning, a single sound (Bee) will be generated. From
the 6
th
to 9
th
times of scanning, double sound (Bee Beep) will be generated. At the last 10
th
time of
scanning, triple sound (Bee Bee Beep) will be generated. Now the distance of that 10
th
time of
scanning will be programmed as a new reading distance. When finished, the reading range setup
will be finalized and green LED will turn off.