IDTECK iPass IP100W, Руководство пользователя

Страница: 10 / 32

10
(2) Press on the keypad. (RF CARD + PIN MODE )
(3) Present RF Cards in the following order to register Configuration Card and User Access Cards + 4~6 digit
Personal Identification Number (PIN) for each User Access Card.
........
Configuration Card User Access Cards + PINs
(4) The first card presented becomes the Configuration Card and the following RF Cards + PINs are registered as
User Access Cards with assigned PINs. Once all User Access Cards and PINs have been registered, present
the Configuration Card again to complete the registration process.
(Please keep the Configuration Card in a secure location for future changes.)
(5) Now, the Main Unit enters the normal operation mode with default settings.
10-3. Registration of PIN ONLY MODE
(1) Apply 12VDC to the unit. All 3 LEDs will be flashing with a powered-up melody (do mi sol me do, do mi sol do~).
(2) Press from the keypad. (PIN ONLY MODE)
(3) Enter to register Configuration PIN then to register User Access PIN(s)
one by one and then enter (Configuration PIN) to complete the registration.
……..
Configuration PIN User Access PIN
(4) The first 4~6 digit PIN becomes the Configuration PIN and the subsequent 4~6 digit PINs are registered as User
Access PINs. Once all User Access PINs have been registered, enter the Configuration PIN again to complete
the registration. (Please store the Configuration PIN for future changes.)
(5) Now, the Main Unit enters the normal operation mode with default settings.
10-4. Registration of RF/PIN Combination MODE
(1) Apply 12V DC to the unit. All 3 LEDs will be flashing with a power-up melody.
(2) Press from the keypad. (RF/PIN Combination Mode)
(3) Present Configuration Card to register Configuration Card to the unit.
(4) Present RF Card(s) or enter 4~6 digit PIN number(s) to register user access card(s) or PIN(s).
(5) Present Configuration Card to complete the registration process.
. . . . .
or or or
PIN PIN PIN
Enter the Configuration PIN again
to complete the registration
Configuration Card again
to end the task