Scanning mode:
Good-read off-
The trigger button must be pressed to activate
scanning. The light source of imager stops scanning when there is a
successful reading or no code is decoded after the Stand-by duration
elapsed.
Momentary-
The trigger button acts as a switch. Press button to
activate scanning and release button to stop scanning.
Alternate-
The trigger button acts as a toggle switch. Press button to
activate or stop scanning.
Timeout off-
The trigger button must be pressed to activate scanning,
and imager stops scanning when no code is decoded after the Stand-
by duration elapsed.
Continue-
Imager always keeps reading, and it does not matter when
trigger button is pressed or duration is elapsed.
Test only-
For test of scan performance only. It is improper to be
utilized to check the accuracy of transmitted data.
Double read timeout:
The imager will require a several times
successful decoding to confirm the data when enabled. The more
confirming times required, the more inhibitive miss-reading code will
be shown. The Multi field scan Enable function won’t be able to work
if set Double confirm.
Double confirm:
If the barcode has been scanned twice, then only
the first barcode will be accepted.
Supplement Check Counter:
It will be more reliable to read the
barcode with extension (supplement) like UPCE/A or EAN-8/13, but
slow down the decoding speed when this counter is set more.