1 0
Example: To set the Track Separator to TAB, enter /e/d/
fq<space>\tab<ENTER> (13 keystrokes).
Start/End Sentinel and Track 2 Account Number Only
The MiniMag can be set to either send or not send, to invoke the
Start/End sentinel, and to send either the Track 2 account number
only, or all the encoded data on Track 2. (The Track 2 account
number setting doesn’t affect the output of Track 1 and Track 3.)
Syntax: /e/d/fv<space>b1<ENTER> where...
b1=0
Do not send start/end sentinel, but send all data on all tracks
b1=1
Send start/end sentinel and send all data on all tracks
b1=2
Do not send start/end sentinel, for any track, but send
account number on track 2 only
b1=3
Send start/end sentinel on tracks 1 and 3, and send account
number on track 2 only
9
Magnetic Track Selections
Track Selection
There are up to three tracks of encoded data on a magnetic stripe.
This option selects the tracks that will be read and decoded.
Syntax: /e/d/fp<space>b1<ENTER>where...
b1=0 for Any Tracks
b1=1 for Track 1 only
b1=2 for Track 2 only
b1=3 for Tracks 1 and 2
b1=4 for Track 3 only
b1=5 for Track 1 and Track 3
b1=6 for Tracks 2 and 3
b1=7 for Tracks 1, 2, and 3
Note: If any of the multiple tracks fails to read for any reason, no data for
any track will be sent.
Track Separator Selection
This option allows the user to select the character to be used to
separate data decoded by a multiple-track reader.
Syntax: /e/d/fq<space>b1<ENTER>where...
b1= the new track separator character can be selected from the
keyboard for printable characters, or from Appendix B: Function Code
Table (1 function code only).
/e/d/fq<ENTER> will return the separator character to its default value
<ENTER>. /e/d/fq<space>\nul will turn off the separator character.
