Programmable
characteristics
Code type selection, check digit selection Decoding option Decoding option
Transmitted character delay, Header selection, trailer selection, message suffix,
good read beep tone and volume, scanner trigger selection
Keyboard emulation type (intermessage delay, keyboard type and keyboard
language)
Serial interface type (ACK/NAK, Xon/Xoff, RTS/CTS, good read LED control,
start/stop bits)
Remark.
Current are marked as RMS (Root mean square)
Indications of BluScan
TM
Status
Green LED
Red LED
Orange LED
Beeper
LED
Link established Blink once
A special beep
Hardware fail
Flash
Program
download
Flash
Program
checksum fail
Flash
Data transmitting
ON
High freq. Beep for
300msec
Data trans. Fail
ON for
300msec
Error beep
Data trans. OK
ON for
200msec
Good beep
Low battery
(<3.2V) (Trigger is
pressed)
Flash
Cradle:
Status
Green LED
Red LED
Orange LED
Beeper
RF
status
LED
Inquiry
Blink
Beeps once a second
Connecting
Blink
Link established
ON
Hardware fail
Flash
Data receiving
from the scanner
ON for 0.5sec
Barcode data
proof or
transmitted
Good beep
Data send to the
host Fail
Error beep
Program
download
Flash
Program
checksum Fail
Flash
Battery
LED
Idle
Charging
Blink
Battery full
ON
Battery/charger
Fail
Blink