IDT DBP 7+4 Скачать руководство пользователя страница 69

Страница: 69 / 93

–

THE

PLUG-INS

IDT processors have an open and modular architecture which is open to receive

plug-ins. These plug-ins are available from IDT Sound Processing Corporation and

can be activated by a simple software upgrade.

There are 4 plug-ins available today. The IDT team regularly develops new plug-ins

for your processors and we invite you to visit our web-site regularly or to subscribe

to our « newsletter » to be among the first to be aware of new functions for your
processors.

If you have not ordered a plug-in with your processor, or you want to test one that

you don’t have all you have to is contact IDT Sound Processing Corporation for an
evaluation which is limited to 30 days..

WARNING: the plug-in from IDT can only be tested

once and only once

and the 30

day trial period starts from the day it is loaded into the unit. Please make sure, then,

to be ready for the test!

To install the plug-ins in your processor nothing could be more simple:

In the « Help » menu, click « Load Plug in » and select the file of the plug-in that

IDT has supplied.

Here are the plug-ins available from IDT and their features:

Содержание DBP 7+4






























































































Результаты поиска

Содержание DBP 7+4

Отзывы:

Бренды по названию

Популярные бренды

IDT DBP 7+4, Руководство пользователя

Результаты поиска

Содержание DBP 7+4

Отзывы:

Бренды по названию

Популярные бренды