3
INTRODUCTION
KEY FEATURES
Thank you for selecting the
electrisave
household electricity monitor. This product was developed to educate people about
the need to use energy in a sustainable manner and to not waste our scarce resources. By providing you with instant
feedback about the cost of electricity consumption, university research and field trails have shown that it is possible to reduce
your electricity cost by up to 25% by careful selection and operation if energy efficient appliances.
It is designed to give many years of reliable service if used correctly, and performs the following functions:
• Monitors and displays electricity cost-per-hour in dollars, pounds or euros
• Monitors and displays total household electricity consumption
• Calculates greenhouse gas emissions per hour
• Alerts user to peak load electricity limits via alarm function
• Displays temperature and humidity inside the home
• Performs a home safety function, checking operating appliances
NOTE
To check if you have left any appliances operating that should have been turned off when you go to bed or leave the
home unattended, simply check the receiver display. If it is higher that usual, investigate the cause and turn off any
unnecessary appliances. In this way you may avoid an electrical house fire
This manual contains important safety and care information, and provides step-by-step instructions for using this product.
Read the manual thoroughly, and keep it in a safe place in case you need to refer to it later. If you misplace this manual you
can access a replacement from our website www.electrisave.co.uk
Main Unit - Receiver
A.
Main LCD Screen
B.
Mode Button
a) Toggle between different display screens
b) Enable adjustment of settings
C. Adjust
Button
Used to adjust values
D.
Alarm Button
Enable/Adjust alarm settings
E.
Wall-Mount Recess Hole
For mounting the unit to a wall
F.
Search Button
To search for and calibrate with Remote Transmitter
G.
On/Off Alarm Button
Turn Alarm on or off
H.
Reset Hole
Returns all settings to default values.
I.
Table Stand
Can be pulled out and used to stand the unit on a
flat surface
J.
Battery Compartment
K.
Plug pack power socket (optional)
Front view
Back view
User Manual 2.qxd 8/19/05 11:34 AM Page 4