700-604-02A Xwave Repeater Manual
Visual Indications
Chime on Repeat
In the chime on repeat mode each channel that is set to chime, when repeated, will chime the
number of times of the channel number and the zone LED will flash for 2 minutes.
Example: If zone 2 & 5 are selected to chime and channel 5
’
s signal is repeated the unit will
chime 5 times and when channel 2
’s signal
is repeated the unit will chime 2 times and the zone
LED will flash for 2 minutes.
TURN ON CHIME ON REPEAT
1.
Make sure the system is in idle mode by making sure none of the visual modes are
selected.
2.
Press chime on repeat button once. (All channels are selected by default.)
3.
Button and channel LEDs will come on for 6 seconds to indicate chime on repeat has
been switched on and zones can be selected to not chime if repeated.
4.
Select channels not to chime:
a.
Press each channel button, you wish not to chime, and the button LED will
go off, indicating it has been deselected.
Note:
You have 6 seconds to select or deselect a channel from chime on repeat mode
being initiated and 6 seconds between each selection and deselection. If no channels are
selected or deselected the unit will go into chime on repeat mode. Chime button will
illuminate and all zone LEDs will switch off.
TURN OFF CHIME ON REPEAT
1.
Press chime on repeat button once.
2.
Chime mode is exited and all deselected chime on repeat channels are cleared.
Visual indication on repeat
The Xwave repeater can be set in a visual mode to visually indicate if a channel is being
repeated.
TURN ON VISUAL INDICATORS
1.
Press the visual indicator button once.
2.
The button LED will flash for 6 seconds.
Note:
During the 6 second period any channel you wish to not show, press their
respective buttons and on each press a further 6 seconds will be initiated to give you time
to select the next channel to be switched off.
3.
After 6 seconds of no activity the visual indicator LED will remain on to indicate that
the repeater is ready to indicate repeated channels.
TURNING THE VISUAL INDICATION MODE OFF
1.
Press the visual indicator button once.
2.
The LED will go off.
