IDS MKII, Руководство по установке

Страница: 9 / 16

IDS Digital Remote Receiver MKII 700-373-02C Issued April 2010 9
3.5 Assign Panic Button
Changing the button that will be the panic button will affect all learned remotes.
Set DIP switch 4, then 8.
The READY LED will flash.
Press the button to be the panic button (on a learned remote).
Clear 8 to save settings.
The ARMED and READY LED’s will flash.
Clear other switches to return to standby mode.
The ARMED LED is on.
3.6 Assign Arm/Disarm Button
Changing the button that will arm the panel will affect all learned remotes.
Set DIP switch 3, then 8.
The READY LED will flash.
Press the button to be the arm button (on a learned remote).
Clear 8 to save this setting.
The ARMED and READY LED’s will flash.
Clear other switches to return to standby mode.
The ARMED LED is on.
NOTE:
When assigning buttons, make sure that the relay assignment is the way you require it (as per “ 6.4
Assign Relay Button ”).
The new ARM/DISARM button will not trigger relay1. (If you change the default setting, the relay will not
follow suit.
3.7 Assign Stay Arm Button
Changing the button that will stay arm the panel will affect all learned remotes.
Set DIP switch 2, then 8.
The READY LED will flash.
Press the button to be the stay arm button (on a learned remote).
Clear 8 to save this setting.
The ARMED and READY LED’s will flash.
Clear other switches to return to standby mode.
The ARMED LED is on.
4. Selecting Standby Mode
On power up (with all the DIP switches cleared ), the receiver enters standby mode, with the red LED on
and the green LED off. Two standby options can be selected via the DIP switches:
Panic disable
By default, this receiver will register a panic condition if ANY button on ANY learned IDS remote is held
down for three seconds. Setting DIP switch 7 (permanently) will DISABLE this feature.