©
2
0
2
0
In
te
llig
ent
D
ig
ita
l S
er
vic
es
G
mbH
V
e
rs
io
n
1
.0
The range of good RF reception is strongly influenced by the installation site of your
Gateway V1 device. Do not place it too close to other objects. An ideal place would
be the top of a shelf or cabinet (rather than in a corner, between other electronic
devices, or on the floor).
- I have reset my password with the button on the login page, and now I cannot
connect to the Gateway anymore.
When you reset your password, the Gateway V1 automatically disconnects from
your home router for security reasons, so you have to login via the Gateway’s Access
Point (AP) on 192.168.55.1 to change the password (Remember, the default
password will be “admin” again). If you do not remember how to use the AP, please
refer to chapter earlier in the manual. As soon as your new password is set, you may
change to the “Settings → Presets” menu and press the “Boot now” button. The
Gateway will reboot, and you can access it via your home router again.
15.
Maintenance and cleaning
The device does not require you to carry out any maintenance. Enlist the help of
an expert to carry out any maintenance or repairs.
Clean the device using a soft, lint-free cloth that is clean and dry. You may dampen the
cloth a little with lukewarm water in order to remove more stubborn marks. Do not
use any detergents containing solvents, as they could corrode the plastic housing and
label.
16.
General information about radio operation
Radio transmission is performed on a non-exclusive transmission path, which means
that there is a possibility of interference occurring. Interference can also be caused by
switching operations, electrical motors or defective electrical devices.
