54
“Write”
is to write the data to the magnetic stripe. It is composed of “Write All Buffer” and
“Do Write” and runs “Write All Buffer” and “Do Write” sequentially.
“Write All Buffer”
is
to transmit the data to the buffer.
“Do Write”
is to write the data stored in the buffer to the magnetic stripe of card. You can
choose the magnetic foil type (LoCo or HiCo) and the track of magnetic stripe.
“Random
Fill”
is to create a random magnetic encoding data for testing.
Batch process repeats the following steps sequentially,
Card “IN”
Move “Mag”
Magnetic “Random Fill”
Magnetic “Write”
Magnetic “Read”
Card “OUT”
.
Figure 78 Magnetic stripe encoding
IC(PC/SC) : Contact Smartcard Encoding
In SOLID-310 printer, a contact smartcard encoder can be installed and SOLID-310 printer
supports the contact smartcard encoder in the printer inside. “IC(PC/SC)” is to test a
contact smartcard encoding.
“ICH Contact”
is to bring the encoder head into contact with the IC chip of smartcard
physically.
“ICH Discontact”
is
to separate the encoder head from the IC chip of smartcard physically
.
“Init”
is to recognize and display the installed contact smartcard reader
.
The recognized
encoder will be displayed at the pull down control.
“Contact”
is
to contact with the smartcard electrically and initialize.
