39
Set Mag. Encrypt Key:
One of security function. When you use SDK, you can encrypt
magnetic stripe encoding data transmitted by USB. You can define and save the
encryption key to SMART-21
using “Set Mag. Encrypt Key”.
②
To show how many cards are issued with SMART-21
printer. “Total Issue Count” is the
number of issued cards from factory shipment;
“User Issue Count” is the number of issued
cards from replacing head. When you replace a head, please initialize the number by
ticking “Reset User Issue Count”.
③
To show ribbon motor management. SMART-21 recognizes ribbon color automatically and
controls motor by ribbon remaining. “RMP+”, “RMP-“, “RMM+”, “RMM-“ are necessary
variables to control ribbon motor. Please do not change values for them as it affects card
quality.
RMP+:
Set the ribbon motor’s max torque value while printing when the balance is max.
RMP- :
Set the ribbon motor’s min torque value while printing when the balance is min.
RMM+:
Set the ribbon motor’s max torque value while moving when the balance is max.
RMM- :
Set the ribbon motor’s min torque value while moving when the balance is min.
Ribbon Position:
Set the ribbon arrangement position
Ribbon Search Mode:
Set the ribbon Search method
Print Wait Time:
Set the time from lifting down the print head to starting print
Initial Flipper Angle:
Set the angle of flipper when card is out if the ‘Card Out’ is ‘Back’
④
Please refer as below for other values.
Display Type:
THIS FEATURE IS NOT SUPPORTED IN SMART-21.
UART Baud Rate:
Set the speed of communication of Internal Serial port. It is used for the
KIOSK model.
Security:
There are several ways to set a security function for SMART-21.
PC Auth.:
You can use a printer with specific PC. It is activated when you click “Set PC
Serial”.
User/Root Auth.
: You can set passwords for User and Administrator.
DCL Mode:
When you use SDK and print cards with DCL mode, you don’t need to install
printer device driver.
