24
(3) Input / Output
[ Supply Tray ]
Supply :
You can select “Auto” if SMART-
21 has 1 input hopper. Please select the
hopper if it has a multi hopper.
Tray :
You can select “CR-80” because
SMART-21 supports CR80 cards only.
Figure 36 Input / Output
(4) Printing
Do Printing
: You can select printing or
not
[ Print Side ]
Side
: THIS FEATURE IS NOT
SUPPORTED IN SMART-21.
[ Front / Back ]
Color
: You can select color or mono print.
Flip
: You can flip an image
Media / Mask
: You can indicate the area
to print by using a predefined mask or user
defined mask (white card, smartcard,
Magnetic stripe card, etc.) on front or back
side.
[ Printing ]
Ribbon :
It shows the type of installed
ribbon. You don’t need to select this option
as SMART-21 recognizes ribbon
automatically with RF Tag.
Speed :
This function is not used in this model.
Mode :
Set printing mode
Standard :
Default print mode. Prints all
area of printing
Figure 37 Printing
You can define a mask.
User defined mask uses BITMAP file
(1012 X 636 pixels).
Blue (RGB(0,0,255)): Print and
Overlay
Sky Blue (RGB(0,255,255)): Overlay
only
Pink (RGB(255,0,255)): Print only
Yellow (RGB(255,255,0)): Florescent
