iDM AERO ILM 2-7, Руководство по установке

Страница: 3 / 68

(C) IDM ENERGIESYSTEME GMBH
Installation instruction AERO ILM
3
Contents
Content
s
Important information on assembly and
operation of the heat pump. These in-
structions must be observed! Space for the customer service
phone No.
5.16. Transport provisions 45
6. H
EATING CONNECTIONS
46
6.1. Requirements heating connections 46
6.2. Safety device 46
6.3. AERO ILM with unregulatet direct heating circuit and Hygienik without separating plate 47
6.4. AERO ILM with unregulated direct heating circuit and AQA 48
6.5. AERO ILM with Hygienic with separating plate and mixer circuits 49
6.6. AERO ILM with cooling buffer and hygienic with layer separate plate 50
6.7. AERO ILM HGL with TERMO 100 and Hygienik without separating plate and cooling circuit 51
6.8. AERO ILM HGL with Hygienic with separating plate and mixer circuits 52
6.9. AERO ILM HGL with Hygenik with separating plate and cockle stove 53
6.10. AERO ILM HGL with cooling and HGL usage in one step 54
6.11. Additional hydraulic connection for heat recovery 55
7. E
LECTRICAL CONNECTION
56
7.1. Power supply 56
7.2. Feedthrough for wiring 57
7.3. Confi guration of outputs and inputs 57
7.4. Connection diagram for the electric components 58
7.5. Confi guration of sensors 59
7.5.1. Sensor confi guration 59
7.5.2. Flow temperature sensor 59
7.6. Connecting the outputs 59
7.7. Grounding the system 59
7.8. Maximum delimitation in underfl oor heating 59
7.9. Connecting external specifi cations 0-10 V 60
7.10. Sum signal zone valves 60
7.11. EMC compatibility 60
8. S
TART
-
UP
61
8.1. Information regarding the start-up 61
8.1.1. Switching the heat pump on for the very fi rst time. 61
8.1.2. Operation 61
8.2. Errors 61
9. A
PPENDIX
62
9.1. AERO ILM 2-7 - Performance data heating - detailed 62
9.2. AERO ILM 2-7 - Performance data cooling - detailed 63
9.3. AERO ILM 4-13 - Performance data heating - detailed 64
9.4. AERO ILM 4-13 - Performance data cooling - detailed 65
9.5. AERO ILM - Product data sheet 66
9.6. Declaration of conformity 67
Subject to changes with regard to engineering and design!