OPF-TH2000/OPF-RH2000 User
’s Guide
12
4.2 Receiver
①
②
③
⑧
④
⑦
⑤
⑨
⑩
⑥
O PTICAL Rx for HDMI
O PF-RH2000
D
C
5
V
3
A
FG
O
U
T
P
U
T
H
D
M
I
R
S
-2
3
2
C
Rx
CLASS 1 LASER PRO DUCT
クラス 1 レーザ製品
O
P
T
IC
A
L
TX
SIGNAL
RX
POWER
L
A
N
STATUS
D
IP-S
W
Panel drawing (Receiver)
#
Part name
Description
①
LAN port
Port for LAN signals
②
RS-232C port
Port for RS-232C signals
③
LED lights
POWER : Lights when power is supplied from the AC adapter.
SIGNAL: Lights when video signals are valid.
TX: Lights when a valid code is sent from the OPF.
RX:
Lights when a valid code is received from the fiber optic
cable connected to the transmitter.
④
FG
Frame ground. An M3 screw is used.
⑤
Optical input connector
for extension
Input connector of digital optical signals for extension.
Connected to the optical output connector of the transmitter using a fiber
optic cable.
⑥
Optical output
connector for extension
Output connector of digital optical signals for extension.
Connected to the optical input connector of the transmitter using a fiber
optic cable.
⑦
HDMI cable fixing hole
Hole for the attached cable clamp to secure an HDMI cable.
⑧
HDMI output connector
Output connector for HDMI signals
Connect to a sink device such as monitor.
⑨
DIP switch
Sets the following items: pre-emphasis and swing of TMDS signals in
the receiver, transmission response time of Hot Plug Detect, and clock
speed of Display. Data Channel signals.
【
See
：
5.3.1
】
⑩
AC adapter connector
Connector for the attached AC adapter.
