OPF-TH1000D/OPF-RH1000D User Guide/Command Guide
50
10.2 Product specification
10.2.1 OPF-H1000D
Item
OPF-TH1000D (Transmitter)
OPF-RH1000D (Receiver)
Input
1 input
HDMI (*1)/DVI 1.0
TMDS single link, HDCP 1.4
Connector: Female HDMI Type A (19-pin) (*2)
1 input
Digital optical signal for extension
RS-232C
Output
1 output
Digital optical signal for extension
RS-232C
1 output
Digital optical signal for daisy chain
1 output
HDMI (*1)/DVI 1.0
TMDS single link, HDCP 1.4
Connector: Female HDMI Type A (19-pin) (*2)
Format
VGA / SVGA / XGA / WXGA(1280x768) / WXGA(1280x800) / Quad-VGA / SXGA / WXGA(1360x768) /
WXGA(1366x768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ / WUXGA
For WUXGA, only Reduced Blanking is supported.
480i / 480p / 576i / 576p / 720p / 1080i / 1080p
Color depth
24 bit (*3)
Dot clock
25 MHz to 165 MHz
TMDS clock
25 MHz to 165 MHz
Plug & Play
DDC2B (Built-in EDID) Max. resolution selectable using built-in EDID
Digital audio input/output
Multi-channel LPCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. input/output level: 0 dBFS
Analog audio output
1 output
Unbalanced Stereo LR
Output impedance: 75 Ω
Reference level: -10 dBu, Max. output level: +10 dBu
Connector: Stereo mini jack (3.5 mm)
-
Cable
for extension
Cable
Simplex fiber cable, SFP optical transceiver (2 LC connectors)
Polishing (*4)
SFP optical transceiver for Multimode : PC polishing (Recommended)
SFP optical transceiver for Singlemode : UPC polishing (Recommended), SPC *APC is not supported
Transmission
distances (*5)
Multimode fiber (OM3) : Up to 984 ft. (300 m)
Multimode fiber (OM4) : Up to 0.62 mi. (1 km)
Singlemode fiber (OS1) : Up to 2.92 mi. (4.7 km)
Singlemode fiber (OS1) : Up to 6.21 mi. (10 km, optional)
Control
RS-232C
1 port/male D-sub (9-pin)
simplex, up to 115.2 kbps
General
AC adapter
Input : 100 - 240 VAC ±10%, 50 Hz/60 Hz ±3 Hz
Output : DC 5 V 3 A (A dedicated AC adapter is provided)
Power
consumption
About 9 Watts
About 8 Watts
Dimensions
4.2 × 1.1 × 7.9” (106 (W) × 28 (H) × 200 (D) mm)
(Quarter rack wide, thin type)
(Excluding connectors and the like)
4.2 × 1.0 × 7.9” (106 (W) × 26 (H) × 200 (D) mm)
(Quarter rack wide, thin type)
(Excluding connectors and the like)
Weight
1.3 lbs. (0.6 kg)
1.3 lbs. (0.6 kg)
Temperature
Operating : 32°F to 104°F (0°C to +40°C)
Storage : -4°F to +176°F (-20°C to +80°C)
Humidity
Operating/Storage: 20% to 90% (Non Condensing)
*1 HEC and ARC are not supported.
*2 Use 16.4 ft. (5 m) or shorter HDMI cables.
*3 Deep Color is not supported.
*4 It is possible to connect without using the recommended polishing method, but that may cause a change of transmission distance ability due to an increase in return loss.
*5 The maximum transmission distance is measured under the following conditions: Fiber that is polished by a recommended method is used, there is no interconnection, and the
allowable bending radius is not exceeded.
10.2.2 SFP Specification
Item
Multimode fiber
Singlemode fiber
Wave length
850 nm (Oxide VCSEL laser*)
1310 nm (Fabry-Perot laser*)
Max. transmission distances
OM3 : 984 ft. (300 m)
OM4 : 0.62 mi. (1 km)
OS1: 2.92 mi. (4.7 km)
OS1: 6.21 mi. (10 km, optional)
Receiver sensitivity (OMA) @10.3Gbps
-13 dBm or higher
-18 dBm or higher
Average Launch Power
-9 dBm to -2.5 dBm
-8.4 dBm to -3 dBm
Max. input power
0 dBm
0 dBm
Connector
LC (Duplex)
*
The lasers in these models meet class1.
